|
EZ-1 Controller
The
settings on the EZ-1Controller are as follows:
|
Settings
|
Injection
Rate
|
When
to use this setting
|
|
Off
|
|
|
|
Drip
|
1
ml./minute
|
Use
for low volume "drip" irrigation zones
|
|
Low
|
5
ml./minute
|
"Low
Growth" Maintenance Setting. Use also during
periods of heavy watering (over 1-1/2" in a week)
|
|
Medium
|
10
ml./minute
|
"Standard
Growth" Maintenance Setting. Use when watering
is approximately 1"-1/2" per week
|
|
High
|
15
ml./minute
|
"High
Growth" Maintenance Setting. Use to keep a very
green lawn or when watering is 1/2" - 1"
per week
|
|
Max
|
20
ml./minute
|
Use
to help "green-up" a poor lawn quickly or
during heavy rain periods when watering is infrequent
(less than 1/2"/week) to assure adequate fertilization
levels/
|
Note:
Based on typical residential sprinkler system with 3/4"
or 1" mainline. For 1-1/4" or 1-1/2" mainlines,
use "high" setting for standard growth
Increasing
the Number of Zones-with the EZ Controller
If
you have more than 8 zones on your property that require
unique fertilization rates, you can easily link additional
controllers to handle 16, 24 or 32 zones. All you need to
do is purchase an additional controller of the right type
which includes a connector to link them together.
How
Controllers Work
The EZ controller is wired into the sprinkler system
controller and is usually mounted beside it. When a sprinkler
zone activates, the FertiGator FertiPro reads this and causes
the injector to pulse which sends fertilizer out into the
line.
The
FertiGator FertiPro injects just one milliliter per pulse.
Injection rates may vary from 1 - 20 milliliters per minute.
|
